EzCut Laser T1 Pro, 22W, 4040

Motherboard: Smarter Laser Motherboard V2.1, with 32Bits MCU
Firmware: Smart Laser Firmware
Control Softwares: APP, LaserGRBL (free), LightBurn (Tolling Software)
Connection Method: USB, WIFI(2.4G), Web UI, TF Card

Free HoneyCommb 40x40cm, A1 cutting, Sample material For Test Cut

Features:
1.Integrated air pump
2.Upgraded Fixture of Laser Module
3.Spring-loaded Mechanical Focus
4.New Nylon Rollers
5.Smart Laser Module: Flame Alert/Lens Cleaning Reminder/Air Pressure Monitoring
6.Safety Precautions:
a.Safety Lock (Keep the Key, Professional Use only)
b.Machine Offset Detection and Protection
c.Machine Tilt Detection and Protection
d.USB Connection Detection and Protection
e.Voltage and Current Safety Control System
f.Emergency Stop Switch
g.Temperature Monitoring

Engraving Area: 400MM×400MM
Engraving Speed: 20000mm/min
Available Laser Modules:
Second-generation COS Technology 22W Laser Modules (Real Luminous Power: 20,000mw)
Every 50 hours of use, please clean the lens with a medical cotton swab and alcohol.

22W One Pass cutting capacity:
Birch plywood: 10mm Basswood plywood: 15mm
Eucalyptus plywood: 5mm Black acrylic: 10mm
Black ABS board: 4mm MDF: 3mm
Paulownia wood: 15mm Bamboo: 8.5mm
Gray cardboard: 3mm Steel plate: 0.05mm
20W thickest cutting capacity:
Soft pine board: 30mm Birch plywood: 12mm
Eucalyptus plywood: 15mm Basswood plywood: 20mm
Black acrylic: 50mm

Box Size: 87*28*29cm
Gross Weight: 9.8kg

Software: Ligthburn * (optinal), LaserGRBL (free) 

1 Year Warranty, Training & Support.

#diodeLaserMalaysia #LaserEngraving #laserCutting #Diy #Malaysia